MariaDB Galera Cluster on Ubuntu 18.04.2 LTS

Notes here: MariaDB Galera Cluster

a Galera Cluster is a synchronous multi-master cluster setup. Each node can act as master. The XtraDB/InnoDB storage engine can sync its data using rsync. Each data transaction gets a Global unique Id and then using Write Set REPLication the nodes can sync data across each other. When a new node joins the cluster the State Snapshot Transfers (SSTs) synchronize full data but in Incremental State Transfers (ISTs) only the missing data are synced.

With this setup we can have:

• Data Redundancy
• Scalability
• Availability

Installation

In Ubuntu 18.04.2 LTS three packages should exist in every node.
So run the below commands in all of the nodes - change your internal IPs accordingly

as root

# apt -y install mariadb-server
# apt -y install galera-3
# apt -y install rsync

host file

as root

# echo 10.10.68.91 gal1 >> /etc/hosts
# echo 10.10.68.92 gal2 >> /etc/hosts
# echo 10.10.68.93 gal3 >> /etc/hosts

Storage Engine

Start the MariaDB/MySQL in one node and check the default storage engine. It should be

MariaDB [(none)]> show variables like 'default_storage_engine';

or

echo "SHOW Variables like 'default_storage_engine';" | mysql

+------------------------+--------+
| Variable_name          | Value  |
+------------------------+--------+
| default_storage_engine | InnoDB |
+------------------------+--------+

Architecture

A Galera Cluster should be behind a Load Balancer (proxy) and you should never talk with a node directly.

Galera Configuration

Now copy the below configuration file in all 3 nodes:

/etc/mysql/conf.d/galera.cnf

[mysqld]
binlog_format=ROW
default-storage-engine=InnoDB
innodb_autoinc_lock_mode=2
bind-address=0.0.0.0

# Galera Provider Configuration
wsrep_on=ON
wsrep_provider=/usr/lib/galera/libgalera_smm.so

# Galera Cluster Configuration
wsrep_cluster_name="galera_cluster"
wsrep_cluster_address="gcomm://10.10.68.91,10.10.68.92,10.10.68.93"

# Galera Synchronization Configuration
wsrep_sst_method=rsync

# Galera Node Configuration
wsrep_node_address="10.10.68.91"
wsrep_node_name="gal1"

Per Node

Be careful the last 2 lines should change to each node:

Node 01

# Galera Node Configuration
wsrep_node_address="10.10.68.91"
wsrep_node_name="gal1"

Node 02

# Galera Node Configuration
wsrep_node_address="10.10.68.92"
wsrep_node_name="gal2"

Node 03

# Galera Node Configuration
wsrep_node_address="10.10.68.93"
wsrep_node_name="gal3"

Galera New Cluster

We are ready to create our galera cluster:

galera_new_cluster

or

mysqld --wsrep-new-cluster

JournalCTL

Jun 10 15:01:20 gal1 systemd[1]: Starting MariaDB 10.1.40 database server...
Jun 10 15:01:24 gal1 sh[2724]: WSREP: Recovered position 00000000-0000-0000-0000-000000000000:-1
Jun 10 15:01:24 gal1 mysqld[2865]: 2019-06-10 15:01:24 139897056971904 [Note] /usr/sbin/mysqld (mysqld 10.1.40-MariaDB-0ubuntu0.18.04.1) starting as process 2865 ...
Jun 10 15:01:24 gal1 /etc/mysql/debian-start[2906]: Upgrading MySQL tables if necessary.
Jun 10 15:01:24 gal1 systemd[1]: Started MariaDB 10.1.40 database server.
Jun 10 15:01:24 gal1 /etc/mysql/debian-start[2909]: /usr/bin/mysql_upgrade: the '--basedir' option is always ignored
Jun 10 15:01:24 gal1 /etc/mysql/debian-start[2909]: Looking for 'mysql' as: /usr/bin/mysql
Jun 10 15:01:24 gal1 /etc/mysql/debian-start[2909]: Looking for 'mysqlcheck' as: /usr/bin/mysqlcheck
Jun 10 15:01:24 gal1 /etc/mysql/debian-start[2909]: This installation of MySQL is already upgraded to 10.1.40-MariaDB, use --force if you still need to run mysql_upgrade
Jun 10 15:01:24 gal1 /etc/mysql/debian-start[2918]: Checking for insecure root accounts.
Jun 10 15:01:24 gal1 /etc/mysql/debian-start[2922]: WARNING: mysql.user contains 4 root accounts without password or plugin!
Jun 10 15:01:24 gal1 /etc/mysql/debian-start[2923]: Triggering myisam-recover for all MyISAM tables and aria-recover for all Aria tables

# ss -at '( sport = :mysql )'

State                Recv-Q                Send-Q                                Local Address:Port                                  Peer Address:Port
LISTEN               0                     80                                        127.0.0.1:mysql                                      0.0.0.0:*         

# echo "SHOW STATUS LIKE 'wsrep_%';" | mysql  | egrep -i 'cluster|uuid|ready' | column -t

wsrep_cluster_conf_id     1
wsrep_cluster_size        1
wsrep_cluster_state_uuid  8abc6a1b-8adc-11e9-a42b-c6022ea4412c
wsrep_cluster_status      Primary
wsrep_gcomm_uuid          d67e5b7c-8b90-11e9-ba3d-23ea221848fd
wsrep_local_state_uuid    8abc6a1b-8adc-11e9-a42b-c6022ea4412c
wsrep_ready               ON

Second Node

systemctl restart mariadb.service

root@gal2:~# echo "SHOW STATUS LIKE 'wsrep_%';" | mysql  | egrep -i 'cluster|uuid|ready' | column -t

wsrep_cluster_conf_id     2
wsrep_cluster_size        2
wsrep_cluster_state_uuid  8abc6a1b-8adc-11e9-a42b-c6022ea4412c
wsrep_cluster_status      Primary
wsrep_gcomm_uuid          a5eaae3e-8b91-11e9-9662-0bbe68c7d690
wsrep_local_state_uuid    8abc6a1b-8adc-11e9-a42b-c6022ea4412c
wsrep_ready               ON

Third Node

systemctl restart mariadb.service

root@gal3:~# echo "SHOW STATUS LIKE 'wsrep_%';" | mysql  | egrep -i 'cluster|uuid|ready' | column -t

wsrep_cluster_conf_id     3
wsrep_cluster_size        3
wsrep_cluster_state_uuid  8abc6a1b-8adc-11e9-a42b-c6022ea4412c
wsrep_cluster_status      Primary
wsrep_gcomm_uuid          013e1847-8b92-11e9-9055-7ac5e2e6b947
wsrep_local_state_uuid    8abc6a1b-8adc-11e9-a42b-c6022ea4412c
wsrep_ready               ON

Primary Component (PC)

The last node in the cluster -in theory- has all the transactions. That means it should be the first to start next time from a power-off.

State

cat /var/lib/mysql/grastate.dat

eg.

# GALERA saved state
version: 2.1
uuid:    8abc6a1b-8adc-11e9-a42b-c6022ea4412c
seqno:   -1
safe_to_bootstrap: 0

if safe_to_bootstrap: 1 then you can bootstrap this node as Primary.

Common Mistakes

Sometimes DBAs want to setup a new cluster (lets say upgrade into a new scheme - non compatible with the previous) so they want a clean state/directory. The most common way is to move the current mysql directory

mv /var/lib/mysql /var/lib/mysql_BAK

If you try to start your galera node, it will fail:

# systemctl restart mariadb

WSREP: Failed to start mysqld for wsrep recovery:
[Warning] Can't create test file /var/lib/mysql/gal1.lower-test
Failed to start MariaDB 10.1.40 database server

You need to create and initialize the mysql directory first:

mkdir -pv /var/lib/mysql
chown -R mysql:mysql /var/lib/mysql
chmod 0755 /var/lib/mysql
mysql_install_db -u mysql

On another node, cluster_size = 2

# echo "SHOW STATUS LIKE 'wsrep_%';" | mysql  | egrep -i 'cluster|uuid|ready' | column -t

wsrep_cluster_conf_id     4
wsrep_cluster_size        2
wsrep_cluster_state_uuid  8abc6a1b-8adc-11e9-a42b-c6022ea4412c
wsrep_cluster_status      Primary
wsrep_gcomm_uuid          a5eaae3e-8b91-11e9-9662-0bbe68c7d690
wsrep_local_state_uuid    8abc6a1b-8adc-11e9-a42b-c6022ea4412c
wsrep_ready               ON

then:

# systemctl restart mariadb

rsync from the Primary:

Jun 10 15:19:00 gal1 rsyncd[3857]: rsyncd version 3.1.2 starting, listening on port 4444
Jun 10 15:19:01 gal1 rsyncd[3884]: connect from gal3 (192.168.122.93)
Jun 10 15:19:01 gal1 rsyncd[3884]: rsync to rsync_sst/ from gal3 (192.168.122.93)
Jun 10 15:19:01 gal1 rsyncd[3884]: receiving file list

#  echo "SHOW STATUS LIKE 'wsrep_%';" | mysql  | egrep -i 'cluster|uuid|ready' | column -t

wsrep_cluster_conf_id     5
wsrep_cluster_size        3
wsrep_cluster_state_uuid  8abc6a1b-8adc-11e9-a42b-c6022ea4412c
wsrep_cluster_status      Primary
wsrep_gcomm_uuid          12afa7bc-8b93-11e9-88fc-6f41be61a512
wsrep_local_state_uuid    8abc6a1b-8adc-11e9-a42b-c6022ea4412c
wsrep_ready               ON

Be Aware: Try to keep your DATA directory to a seperated storage disk